7-inch colored display, and delivers high bandwidth and sample rate under matchless price point worldwide; Advanced Functionalities include automatic measurements, advanced triggering modes, record length. Bring extraordinary user-friendliness and measurement precision for debug, design, education, quality control, training, manufacturing test for a variety of industrial users.
Bandwidth： 60 MHz
Real-time Sample Rate： 1GSa/s
Equivalent Sample Rate： 25GSa/s
Record Length(Sample Points) ： Single-channel: Maximum 1M; Dual-channel:Maximum 512K (4K,16K,40K optional)
SEC/DIV Range： 4nS/div-40S/div (in a 2, 4, 8 sequence)
Delay Time Accuracy： 500ps
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
u Vertical
A/D Converter： 8-bit resolution, each channel sampled simultaneously
VOLTS/DIV Range： 2mV/div～5V/div at input BNC
Position Range： ±50V(5V/div),±40V(2V/div～500mV/div),2V(200mV/div～50mV/div)±400mV(20mV/div～2mV/div)
Bandwidth Limit： 20MHz
Rise Time at BNC： ≤ 5.8ns
DC Gain Accuracy： ±4% for Sample or Average acquisition mode, 5mV/div to 2mV/div
±3% for Sample or Average acquisition mode, 5V/div to 10mV/div
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
u Trigger
"Trigger Sensitivity(Edge Trigger Type)" ：DC: CH1/CH2(Typical) 1div from DC to
10MHz;1.5div from 10MHz to Full
EXT（Typical） 200mV from DC to 40MHz
EXT/5（Typical） 1V from DC to 40MHz
AC: Attenuates signals below 10Hz
HF Reject: Attenuates signals above 80kHz
LF Reject: Attenuates signals below 150kHz
Noise Reject: Reduces trigger sensitivity
Trigger Level Range： CH1,CH2: ±8 divisions from center of screen
EXT:±1.2V EXT/5: ±6V
"Trigger Level Accuracy,typical (Accuracy is for signals having rise and fall times ≥20ns)" ：
CH1,CH2: ±(0.3div×V/div) (within ±4 divisions from center of screen)
EXT: ±(6% of setting + 40mV)
EXT/5: ±(6% of setting + 200mV)
Holdoff Range： 100ns-10s
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
u Trigger Type
Edge： Trigger on the rising or falling edge
Pulse Width： Trigger (when >,<,=,≠) on positive or negative pulses Pulse Width Range: 20ns-10s
Video： Trigger on an NTSC, PAL, or SECAM standard video signal Line Range: 1-525 (NTSC),
1-625 (PAL/SECAM)
Slope： Trigger (when >,<,=,≠) on a positive or negative slope ；Set Time: 20ns–10s
Overtime： From the rising or falling edge；Set Time: 20-10s
Alternate： Internal trigger on edge, pulse width, video or slope
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
u Measurement
Cursors: Manual: The difference between voltage cursors △V; the difference between time cursors
△T; 1/△T calculated by Hz.
Tracing: The voltage and time at a waveform point
Automatic: Pk-Pk, Max, Min, Mean, Cyc RMS, Frequency, Period, Rise Time, Fall Time, Positive
Width, Negative Width
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
u Display
Type： Right angle 7"TFT 16-digit color LCD
Resolution： 800*480 dots
Contrast： 16 gears, with the progress bar to show adjustment
Interface： USB host and USB slave
|
